bitwerk Streamer
From the network to XLR in one box, aimed at the best audio quality we can measure.
bitwerk Streamer
Made for
Section titled “Made for”Venues and bars with a serious system, listening rooms and dealers, large libraries, reference playback in studios and advanced systems at home.
One Streamer per room
Section titled “One Streamer per room”Each Streamer is sold on its own. Start with a bitwerk Base and one Streamer, and add a Streamer whenever a room or a zone joins: it finds the system on the network and plays in minutes, alone or in sync with the other rooms.
Highlights
Section titled “Highlights”- Bit-perfect, provably: every file reaches the DAC at its own rate, unaltered, and the display shows it.
- Native DSD up to DSD512, PCM up to 384 kHz.
- Balanced XLR and RCA outputs, each with its own output stage and a mute relay against clicks at power on and off.
- A clean design around the DAC: the DAC sets the clock, and the audio side is isolated from the computer side, with its own low-noise supply.
- Front panel: a long bar display with the native bitwerk interface, a large level knob and an infrared receiver for the remote you already have.
- Same system: the Streamer is a bitwerk player like every other, in multi-room, with room groups, the studio tools and every control.
Targets
Section titled “Targets”| Target | |
|---|---|
| SINAD at XLR | 120 dB or better |
| Dynamic range | 130 dB(A) or better |
| Outputs | XLR 4 Vrms, RCA 2 Vrms |
| Formats | PCM up to 384 kHz, DSD up to DSD512 |
| Network | Gigabit Ethernet, copper or fiber |
These are design targets; we publish measured values with the first units.
Today: a Raspberry Pi with a good DAC already plays bit-perfect with bitwerk. See player hardware.
Reserve a bitwerk Streamer
Tell us where it will play and how many you need. We keep you posted and reserve a place in the first batch.